Connecting to FTP Servers with the Site Map

Using Site Map to Connect to FTP Servers with ALFTP

  1. You can connect to saved sites through the Site Map. Select a site and click OK to connect. This also saves any changes you make to the site.

      (Click the picture below for more detailed information on that portion of the Site Map.)


    FTP Site Map

  2. The following dialog is displayed while connecting to an FTP server.

     

  3. ALFTP notifies you when you have a successful connection established.

      (Click on the image below for a detail explanation on that portion.)

     
    ALFTP default main interface Displays FTP site address ALFTP main menu Main toolbar contains common FTP commands ALTools info bar in freeware and unregistered versions ALFTP FTP Server Explorer ALFTP FTP Client Explorer Connection status window displays FTP commands and results FTP Transfer queue FTP status bar contains useful transfer information

Related Topics
[ Table of Contents ] - [ Index ] - [ Introduction to ALFTP ] Quick Connect, Connection Preferences

Browse FTP sites then click to connect Enter a descriptive title or name for an FTP site Enter the FTP address here Enter your FTP ID or login as given by the sysadmin Enter your FTP password here This is where start when you first login When you login to a site, this is your default local folder for that site Set your FTP port (usually 21), check passive, and set your ftp connect timeout value Add an FTP group Add FTP site Delete FTP site or group This panel contains FTP site information

 

Copyright (c) 2000~2005, ESTsoft Corporation. All rights reserved.
Get more PC utilities at ALTools.